17
RS-602/622 BELTPACK
CONNECTING YOUR BELTPACK
You have the option to connect a beltpack to intercom stations,
beltpacks, headsets, and a computer.
The following table shows the connectors for the RS-602 and RS-622
beltpacks, which vary slightly. Figure 5 illustrates the connectors for
an RS-602 beltpack
Table 1: Connectors for RS-602 and RS-622 Beltpacks
Intercom Connector
The beltpack connects to a main station, power supply, or to other
beltpacks through the connector labeled “intercom.” When you press
the blue button next to this connector, the attached cable releases.
CONNECTOR RS-602 RS-622
Intercom 6-pin
female
6-pin female
Loop-through 6-pin male none
Auxiliary headset 2.5 mm 2.5 mm
Headset 4-pin male 6-pin female
1
To Next Page
Loading...
