1 8
RS-602/622 BELTPACK
Figure 1: RS-602 Connector Panel
Note: The beltpack’s intercom connectors use the Switchcraft-style 6-pin
configuration. If ordering Neutrik 6-pin plugs to make a cable or patch
panel, specify that you need the Switchcraft pin configuration. This
configuration usually has an “S” suffix at the end of the Neutrik model
number.
*OUFSDPN$POOFDUPS
-PPQ±5ISPVHI$POOFDUPS
1SPHSBN±"VEJP7PMVNF$POUSPM
"VYJMJBSZ)FBEQIPOF$POOFDUPS
)FBETFU$POOFDUPS
To Next Page
Loading...
