User manual
Page 8 © clearaudio electronic GmbH, 2022-11
2.1
Place the pre-mounted chassis on your hi-rack or another suitable surface.
Pic. 3:
Performance DC
chassis
2.2
To avoid hum noises we recommend to ground the bearing. For that attach the supplied grounding
wire to the the existing screw on the bottom side of the chassis (#2.5).
Pic. 4: Grounding the bearing of the
Performance DC
2.3
Please remove the protective seal from the bearing shaft and place two drops of the synthetic
bearing oil on the ceramic bearing shaft. Slip the bearing top onto the bearing shaft of the turntable
(also available through www.analogshop.de Art. No. AC068).
Pic. 5: Bearing oil
To Next Page
Loading...
