User manual / Bedienungsanleitung
Page / Seite 8 clearaudio electronic GmbH 2015
Now you are ready for the antiskating adjustment. This also depends on the tracking force
of the cartridge and the diamond shape.
Illustration 1 Illustration 2 Illustration 3
(minimal Antiskating) (medium Antiskating) (maximum Antiskating)
Picture 9-11: Alignment of the antiskating
The general set-up is now finished.
Connect your
Satisfy
-tonearm now with the phono input of your phono-preamplifier.
(More information on adequate phono-preamplifiers and interconnects you can find on our
website www.clearaudio.de).
Please notice:
If you don`t use your
Satisfy
tonearm for a longer time, please move the tonearm lifter in
regular intervals. This avoid that the tonearm hang in a position when you listen to the
music again.
Now you are finally ready to play your vinyl records.
Clearaudio wish you a lot of pleasure with your new
Satisfy
tonearm.
alignment of the antiskating tracking force position of the antiskating-screw
minimal antiskating 10 – 15mN see illustration 1
medium antiskating 15 – 20mN see illustration 2
maximum antiskating 20mN and more see illustration 3
To Next Page
Loading...
