Quick-Start Guide
4QSG-0081-002v1.0 January 2021
WARNING: TO
PREVENT FIRE
OR
ELECTRICAL
SHOCK
HAZARD, DO
NOT EXPOSE
THIS
PRODUCT TO
RAIN OR
MOISTURE
THE LIGHTING FLASH
AND ARROWHEAD
WITHIN THE TRIANGE IS
A WARNING SIGN
ALERTING YOU OF
DANGEROUS VOLTAGE
INSIDE THE PRODUCT.
THE EXCLAMATION POINT
WITHIN THE TRIANGLE IS A
WARNING SIGN ALERTING
YOU OF IMPORTANT
INSTRUCTIONS
ACCOMPANYING THE
PRODUCT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
SEE MARKING ON BOTTOM/BACK OF PRODUCT
RISK OF ELECTRIC SHOCK DO
NOT OPEN
AVIS RISQUE DU CHOC ELECTRIQUE
- NE PAS OUVRIR
Use only in
non-tropical
locations.
Use only at
altitudes of
2000 meters
or less.
CAUTION
The BMA CTH
The BMA CTH is a second-generation Beamforming Microphone Array
solution for ceiling-tile installations, featuring 24 microphones, beamforming,
and adaptive-steering technology (think of it as smart switching) designed
specifically for the CONVERGE
®
Huddle CTH.
The array connects with the Huddle CTH through a Peripheral Link (P-Link) port.
Power to the arrays is supplied through a Power-Over-Ethernet (PoE) or P-Link
connection from CP2.
The array comes in both a 24 inch and 600 mm size. An optional adapter that
converts the 600 mm version to 625 mm is available.
Important: BMA CTH arrays can be used only with CONVERGE Huddle
CTH DSP mixers. They are not compatible with CP2 mixers, CONVERGE
Pro, or first-generation Beamforming Mic Array systems.
To Next Page
Loading...
