EasyManua.ls Logo

ClearOne XAP 800 - User Manual

ClearOne XAP 800
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
XAP™ 800 Audio Conferencing
System
Installation & Operation Manual

Table of Contents

Other manuals for ClearOne XAP 800

Question and Answer IconNeed help?

Do you have a question about the ClearOne XAP 800 and is the answer not in the manual?

Summary

CHAPTER 1: Introduction

CHAPTER 2: Installation

Hardware Setup and Connections

Step-by-step guide for physically connecting the XAP 800 unit and its components.

CHAPTER 3: System Configuration

G-Ware Software Installation

Minimum system requirements and detailed steps for installing G-Ware software.

Site Setup and Unit Properties

Creating site files and configuring individual unit properties using G-Ware.

Audio Routing and Matrix Configuration

How to route audio signals between inputs, outputs, and processing blocks using the matrix.

Inputs, Outputs, and Processing Setup

Detailed configuration and adjustment of all input, output, and processing channels.

CHAPTER 4: Advanced Configuration

Presets: Overview and Creation

Understanding and creating presets for flexible room configuration and instantaneous changes.

Macros: Creation and Management

Creating and managing macros for automated sequences and multiple preset execution.

CHAPTER 5: Operation

CHAPTER 6: Control

GPIO Builder for External Control

Configuring pin assignments for external control and status monitoring via GPIO.

Remote Builder for IR Remote and Panels

Programming remote controls and wall panels for system operation.

Summary

CHAPTER 1: Introduction

CHAPTER 2: Installation

Hardware Setup and Connections

Step-by-step guide for physically connecting the XAP 800 unit and its components.

CHAPTER 3: System Configuration

G-Ware Software Installation

Minimum system requirements and detailed steps for installing G-Ware software.

Site Setup and Unit Properties

Creating site files and configuring individual unit properties using G-Ware.

Audio Routing and Matrix Configuration

How to route audio signals between inputs, outputs, and processing blocks using the matrix.

Inputs, Outputs, and Processing Setup

Detailed configuration and adjustment of all input, output, and processing channels.

CHAPTER 4: Advanced Configuration

Presets: Overview and Creation

Understanding and creating presets for flexible room configuration and instantaneous changes.

Macros: Creation and Management

Creating and managing macros for automated sequences and multiple preset execution.

CHAPTER 5: Operation

CHAPTER 6: Control

GPIO Builder for External Control

Configuring pin assignments for external control and status monitoring via GPIO.

Remote Builder for IR Remote and Panels

Programming remote controls and wall panels for system operation.

ClearOne XAP 800 Specifications

Operating Environment IconOperating Environment
operating_temperature32 to 100° F/0 to 38° C
humidity15% to 80%, non-condensing
Power IconPower
power_input_range100–240 VAC; 50/60 Hz
power_consumption30 W typical
phantom_power24 V, selectable
Audio Performance IconAudio Performance
frequency_response20 Hz to 20 kHz ±1 dB
noise_ein-126 dBu, 20 kHz BW, max gain
thd_plus_n<0.02%
snr80 dB re 0 dBu, (A-weighted)
dynamic_range100 dB (A-weighted)
crosstalk<-91 dB re 20 dBu @ 20 kHz channel to channel
Weight and Dimensions IconWeight and Dimensions
dimensions17.25" x 10.25" x 1.75"
dimensions_metric43.8 x 26 x 4.5 cm
weight_dry7 lb/3.2 kg
weight_shipping12 lb/5.5 kg

Related product manuals