Chapter 3: Using The Chat Application 21
DEVICE SETUP
Device Setup configures the Chat 150 for use with specific devices to ensure optimal sound quality. To
configure the Chat 150, use the procedure shown below (refer to Figure 3.1 for all steps).
1. Select a device in the Select 1
st
column.
2. Select a manufacturer in the Select 2
nd
column.
3. Select a model in the Select 3
rd
column.
4. Click the Add to My Devices button to add this device to your My Devices list.
5. Click the Apply to Chat button to apply these audio settings to the Chat 150.
If the device, manufacturer, or model is not available, select either the Other or the All option in the appropriate
column. Doing so provides a basic audio configuration for the device, and allows you to change it as needed
to achieve optimal sound quality. See OPTIMIZING SOUND QUALITY on page 12 for instructions.
CHAPTER 3: USING THE CHAT APPLICATION
FIGURE 3.1 My Devices Screen
To Next Page
Loading...
