12
Turning On/Off
One-Time Battery Eng
agement
On the back of the QConnect there is a small switch labeled +/- .
Using a paperclip or pen tip, move the switch to the + position. This
is the only time you will ever need to touch this switch.
I
n order to preserve the integrity of the battery while the QConnect travels from the
production line to our warehouse and the warehouses of retailers across the
country, we protect it by keeping the battery disengaged. Similar to the battery pull
tab you might see on a new toy or on hearing aid batteries in their packaging, once
you remove the tab, the battery becomes engaged. You will only need to do this once;
as mentioned on page 11, this is NOT an on/off switch.
To Next Page
Loading...