CleaverBrooks Prometha - Hardware and Tools Required; Prometha Hardware Components; Installation Tools Required

Prometha™ Installation
750-441
1
The Cleaver-Brooks Prometha™ Connected Boiler Solution collects and transmits Hawk and network
data to the C-B cloud to allow customer accessibility via web-based dashboards and optional user
notifications. The specific Hawk network PLCs that are available for this solution are:
• Hawk ICS (PLC must include Ethernet port)
• Hawk 1000
• Hawk 4000
• Hawk 4000 V2
1 - Hardware Required:
Prometha™ requires the addition of four major components to allow data collection from the PLC and
transmission of that data to the cloud via LTE cellular connection.
• Cellular Enable Gateway Device
• Gateway Power Cable
• 12VDC Power Supply
• Antenna
Optional Hardware:
5- or 8-Port Ethernet Switch (optional based on availability of Ethernet ports)
Miscellaneous:
Cables, fuses, cable ties, and DIN rail components - see Parts List.
2 - Tools Required:
Tape measure
Alcohol wipes
Pencil
Drill
7/8” hole saw
Adjustable pliers
Screwdrivers
Diagonal cutter
Electrical Specifications
Voltage: 120VAC, 50-60 Hz
Amps: 1.1A