Displaying in tons
Weight can be displayed in Metric ton
(1000 kg) tmet or Imperial ton (2000
lbs). timp
➔ TonDisplay Off↑
Nb Decimal 2
Cycle time 2
Auto Zero On↓
When the curser is on TonDisplay,
press Cycle to select Off, tmet
(metric) or imp (imperial). Press ACQ
to exit.
Note!
Even if you chose to display in tons,
you will need to calibrate in pounds
(lbs) or kilograms (kg). TM or TM will
be displayed on the main screen
where kg or lbs would be.
Number of decimals
Choose the number of decimals that
will be seen when you choose to
display in tons. (0-1-2).
TonDisplay Off↑
➔ Nb decimal 2
Cycle Time 2
Auto Zero On↓
When the curser is on Nb decimal
press Cycle to select the number
of decimals you want displayed 0, 1 or
2. Press ACQ
to exit.
Cycle time
Select how long you want the different
channel weights will be displayed
when in Cycle.
TonDisplay Off↑
Nb Decimal 2
➔ Cycle time 2
Auto Zero Oui↓
When the curser is on Cycle time,
press Cycle select between 1 and
15 seconds. Press ACQ
to exit.
Auto Zero
When performing an empty Cal, a zero
must be done before recording the
weights. This function will perform an
automatic zero if the empty weight is
changed.
TonDisplay Off↑
Nb Decimal 2
Cycle Time 2
➔ Auto Zero On↓
When the curser is on Auto Zero
press Cycle to turn auto zero On
or Off. Press ACQ
to exit.
19
To Next Page
Loading...
Need help?
General
