Clevemed SleepView - Chapter 2: About the SleepView System; General Device Description; SleepView Monitor Overview; Signals Measured by the Monitor

SLEEPVIEW USER MANUAL
7
Chapter 2: About SleepView
General Device Description
SleepView is a type III sleep system capable of recording, displaying, scoring and
analyzing physiological signals for sleep studies. The system is also capable of
generating flexible, customizable reports for efficient interpretation and diagnosis. The
SleepView system consists of one hardware component, SleepView® Monitor, and a
software component. The software is SleepView
SM
Manager with either the web portal
www.clevemedsleepview.com or Crystal PSG™ desktop software. The SleepView
Monitor is worn by the patient and is responsible for acquiring the physiological signals
from sensors on the body. The SleepView Monitor amplifies, samples, and digitizes the
physiological signals and stores the data in internal memory.
SleepView Monitor
The SleepView monitor can record up to 8 signals (summarized below). The SleepView
monitor is powered by one AAA battery, typically lasting for more than 10 hours of data
acquisition time.
Signals Measured:
• Airflow (pressure-based, compatible with CPAP)
• Auxiliary (thermistor, IDcheck™ or Respiratory Effort)
• Snore
• Pulse Oximetry
• Respiratory Effort (chest)
• Body Position (supine, prone, left, right, and upright)
• Heart Rate
• Sleep/wake (actigraphy) – web portal only