Clevo D900T - Page 31

Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
5. Release the cable and lift the hard disk assembly up out off the computer.
6. Remove screws - in order to separate the bracket from the hard disk(s) & , and disconnect the
cable .
7.
Reverse the process to install a new hard disk(s).
10
11 18
19 20 21
10
Figure 2 - 3
HDD Removal
c. Release the cable and lift
the assembly out of the
computer.
d. Remove the screws and
cable, then separate the
HDD(s) from the bracket.

10. HDD Cable
19. HDD Bracket
20. Master HDD
21. Slave HDD
•8 Screws
15
16
17
18
19
20
21
c.
d.
10
10
11
12
13
14