Clevo P170EM - Removing the Battery

Disassembly
Removing the Battery 2 - 5
2.Disassembly
Removing the Battery
1. Turn the computer off, and turn it over.
2. Slide the latch in the direction of the arrow (Figure 1a
).
3. Slide the latch in the direction of the arrow, and hold it in place (Figure 1a
).
4. The battery may be levered up at point (Figure 1b
).
5. Lift the battery out of the compartment (Figure 1c
).

4. Battery
1
2
3
6
4
a.
b.
2
1
4
3
c.
4
3
1
2
Figure 1
Battery Removal
a. Slide the latch and hold in
place.
b. Slide the battery out in
the direction of the arrow.
c. Lift the battery out.