Need help?Do you have a question about the Clevo P151EM1 and is the answer not in the manual?
Company rights to revise publication, information accuracy, and copyright/trademark notices.
Lists registered trademarks of Intel Corporation and Microsoft Corporation.
Intended for service personnel; details manual structure including Introduction, Disassembly, and Appendices.
Provides essential precautions to reduce risk of fire, electric shock, and injury when using electrical equipment.
Provides suggestions to prevent damage to the notebook computer through proper handling and environment.
Keep computer away from strong magnetic fields to maintain performance and prevent data damage.
Details specific requirements for using the power adapter, plugs, and ensuring safe connection.
Lists warnings regarding battery type, damage, repair, disposal, and handling to prevent hazards.
Step-by-step instructions for initial system setup, including packing removal, battery insertion, and power on.
Explains the manual's coverage of servicing/upgrading the P170EM notebook and references other manuals.
Lists detailed specifications for CPU, LCD, BIOS, Storage, Memory, Core Logic, and Video Adapters.
Details the available system interface ports, including USB, HDMI, DVI, and other connectors.
Diagram and labels identifying key external components visible when the LCD panel is open.
Diagrams and labels identifying external components on the front and right side of the laptop.
Diagrams and labels identifying external components on the left and rear sides of the laptop.
Diagram and labels identifying external components on the bottom of the laptop, including battery and vents.
Diagram and labels identifying key components on the top side of the mainboard.
Diagram and labels identifying key components on the bottom side of the mainboard.
Diagram and labels identifying various connectors on the top side of the mainboard.
Diagram and labels identifying various connectors on the bottom side of the mainboard.
Introduces step-by-step disassembly instructions and explains the use of margin boxes for information and warnings.
Lists recommended tools required for performing disassembly and maintenance procedures on the notebook PC.
Provides crucial precautions for personal safety and preventing computer damage during maintenance tasks.
Lists disassembly steps for various components and the corresponding page numbers for detailed instructions.
Step-by-step instructions with diagrams for safely removing the notebook's battery.
Provides instructions for removing the primary hard disk drive, including upgrade process and system warnings.
Step-by-step instructions with diagrams for removing the optical drive from its bay.
Instructions for removing the hard disk drive from the secondary HDD bay, if installed.
Provides instructions for accessing and removing primary RAM modules located under the bottom case cover.
Instructions for accessing and removing secondary RAM modules located under the keyboard.
Step-by-step instructions with diagrams for disconnecting cables and removing the Wireless LAN module.
Procedure for removing and installing the CPU, including heat sink removal and CPU warnings.
Procedure for removing and installing the video card, including heat sink removal and caution about heat.
Step-by-step instructions for removing the top case, disconnecting the microphone cable, and removing the microphone.
Table indicating the page numbers for illustrations of various component part lists.
Illustration showing the exploded view of the top assembly with fingerprint reader and associated part numbers.
Illustration showing the exploded view of the top assembly without fingerprint reader and associated part numbers.
Illustration showing the exploded view of the bottom assembly and associated part numbers.
Illustration showing the exploded view of the LCD assembly and associated part numbers.
Illustration showing the Hard Disk Drive components and their part numbers.
Illustration showing the COMBO drive components and their part numbers.
Illustration showing the DVD-Dual Drive components and their part numbers.
Table listing schematic diagrams by component and their corresponding page numbers (B-2 to B-63).
Provides a block diagram illustrating the overall system architecture and component interconnections.
Circuit diagram for the Trusted Platform Module (TPM) interface and function.
Schematic detailing the Processor's interface with DMI, PEG, and FDI signals.
Schematic detailing the Processor's interface with CLK, MISC, JTAG, and DRAMRST signals.
Schematic detailing the Processor's DDR System Memory A and B interfaces.
Schematic detailing the Processor's power supply and sense line connections.
Schematic detailing the Processor's graphics, power rails, and memory VREF interfaces.
Schematic detailing the Processor's Ground (VSS) connections.
Schematic detailing the Processor's reserved pins and configuration strap settings.
Circuit diagram for Channel A SO-DIMM 0 memory module interface.
Circuit diagram for Channel A SO-DIMM 1 memory module interface.
Circuit diagram for Channel B SO-DIMM 0 memory module interface.
Circuit diagram for Channel B SO-DIMM 1 memory module interface.
Circuit diagram for the MXM PCI-Express interface, including power and signal connections.
Circuit diagram for the LCD panel, backlight inverter, and CRT display connections.
Circuit diagram for the JMB380C FireWire controller, including PCIE and USB connections.
Circuit diagram for the Digital Visual Interface (DVI) port, including TMDS signals and DDC.
Circuit diagram for the Display Port interface, detailing signal connections and power.
Circuit diagram for the High-Definition Multimedia Interface (HDMI) port, including TMDS signals and DDC.
Schematic detailing the Platform Controller Hub's Real-Time Clock, High Definition Audio, and SATA interfaces.
Schematic detailing the Platform Controller Hub's PCI-Express, SMBus, and clock interfaces.
Schematic detailing the Platform Controller Hub's DMI, FDI, and Power Good signals.
Schematic detailing the Platform Controller Hub's LVDS, DDI, and CRT display interfaces.
Schematic detailing the Platform Controller Hub's PCI, USB, and reserved pin connections.
Schematic detailing the Platform Controller Hub's GPIO, CPU, and NVRAM interfaces.
Schematic detailing the Platform Controller Hub's power supply rails and regulators.
Schematic detailing the Platform Controller Hub's power supply rails and regulators.
Schematic detailing all Ground (VSS) connections for the Platform Controller Hub.
Circuit diagram for USB 3.0, eSATA, and USB charging port functionality.
Circuit diagrams for USB 2.0 ports, CCD camera, Mini PCIE, and LID switch.
Circuit diagrams for LED controls, hotkey functions, LID switch, and fan control.
Circuit diagram for the RJ-45 Gigabit LAN connector.
Circuit diagram for the Realtek ALC892 audio codec, detailing audio paths and interfaces.
Circuit diagram for the audio amplifier chip, detailing speaker and subwoofer connections.
Circuit diagram for the Keyboard Controller (KBC) IT8518E, including SPI, LPC, and SMBUS interfaces.
Circuit diagram for controlling the keyboard backlight illumination.
Circuit diagrams for mSATA, fan control, touchpad, fingerprint reader, and multi-card reader interfaces.
Circuit diagram for the RTL8411 card reader, detailing SD, MS, and LAN interfaces.
Circuit diagram for the USB 3.0 port, including power and data connections.
Schematics detailing the VDD3 and VDD5 power supply circuits and their regulators.
Schematics detailing the 5VS, 3.3VS, and 1.5VS power supply circuits.
Schematic detailing the 1.05VS power supply circuit and its regulator.
Schematic detailing the 1.5V and VTT_MEM power supply circuits.
Schematic detailing the 1V and 1.8VS power supply circuits.
Schematic detailing the V-Core 1 power supply circuit for the CPU.
Schematic detailing the V-Core 2 power supply circuit for the CPU.
Circuit diagram for the AC adapter input and battery charging system.
Schematic detailing the 0.85VS power supply circuit for the CPU VCCSA.
Circuit diagram for the audio board, showing connections for speakers, microphone, and headphone jacks.
Circuit diagram for the P150 Optical Disk Drive (ODD) board, including SATA and power connections.
Circuit diagram for the P150 Click Board, showing USB, SPI, and other interface connections.
Circuit diagram for the P150 LED 1 Board, showing connections for power and status LEDs.
Circuit diagram for the P150 LED 2 Board, showing connections for HDD, CD-ROM, and WLAN LEDs.
Circuit diagram for the P150 LED 3 Board, showing connections for Scroll, Caps, and Num Lock LEDs.
Circuit diagram for the P170 HDD and ODD board, showing SATA and power connections.
Circuit diagram for the P170 LED Board, showing connections for power, WLAN, BT, and SATA LEDs.
Circuit diagram for the P170 Click Board, showing USB, SPI, and other interface connections.
Circuit diagram for the P170 Fingerprint Board, showing USB and SPI connections.
Circuit diagram for the P150 HDD board, showing SATA and power connections.
Circuit diagram for the P150 LED Board_L, showing connections for Num, Caps, and Scroll Lock LEDs.
Circuit diagram for the P150 LED Board_R, showing connections for WLAN, BT, and SATA LEDs.
Illustrates the timing sequence of power rails and signals during system startup.
Lists essential steps for updating the BIOS, including downloading, unzipping, and preparing bootable media.
Provides instructions on accessing the Clevo website to download the correct BIOS version for the model.
Instructions for unzipping BIOS files and creating bootable CD/DVD/USB media for the update process.
Guide on configuring the BIOS to boot from the external drive containing the BIOS update files.
Detailed steps for using flash tools in DOS to update the BIOS, including command execution.
Instructions for restarting the computer from HDD, entering BIOS, loading defaults, and saving changes.
To Next Page
General
