Clevo P375SM - Page 46

Disassembly
2 - 22 Removing the VGA-2 Card
2.Disassembly
5. Remove screws & from the VGA-1 assembly.
6. Disconnect the VGA cable between the master and slave cards (do not forget to reconnect the cable if you are
replacing two cards).
7. Carefully lift the VGA-2 card off the mainboard.
10
11
12
13
c.
d.
15
12
13
10
11
13
12
12
NVidia VGA Cable AMD VGA Cable
Figure 18
VGA-2 Card
Removal (cont’d)
c. Remove the screws and
disconnect the VGA ca-
ble.
d. Lift the VGA-2 card out.

12. VGA Cable
13. VGA-2 Card
•2 Screws