Clevo P375SM - Removing the Wireless LAN Module

Disassembly
Removing the Wireless LAN Module 2 - 27
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, and turn it over, remove the battery (page 2 - 5), keyboard and keyboard shielding plate
(page 2 - 11).
2. Remove the screw and carefully disconnect cables - .
3. The Wireless LAN Module
(Figure 23b) will pop-up, and you can remove it.
Figure 23
Wireless LAN
Module Removal
a. Remove the screw and
disconnect the cables.
b. Remove the WLAN
module.
Note: Make sure you
reconnect the antenna
cables.
1
2
3
4
a.
2
4
b.
3
1

4. Wireless LAN Module
•1 Screw