Clevo W150HRM - Removing the 3 G Module

Disassembly
2 - 14 Removing the 3G Module
2.Disassembly
Removing the 3G Module
1. Turn off the computer, turn it over, and remove the battery (page 2 - 5) and the component bay cover (page 2 - 9).
2. The 3G module will be visible at point on the mainboard (Figure 9a).
3. Carefully disconnect the cable , and then remove the screw
(Figure 9b).
4. The 3G module (Figure 9c) will pop-up, and you can remove it from the computer (Figure 9d).
Figure 10
3G Module Removal
a. Locate the 3G module.
b. Disconnect the cable
and remove the screw.
c. The module will pop-up.
d. Remove the 3G module.
Note: Make sure you
reconnect the antenna
cable to socket.
1
2
3
4
b.
c.
a.
3
2
4
d.
4
1

4. 3G Module
•1 Screw