Clevo W330AU - Page 31

Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
5. Remove screws - from the HDD assembly (Figure 3c).
6. Slightly lift and pull the hard disk in the direction of arrow (Figure 3d).
7. Lift the hard disk assembly out of the bay (Figure 3e).
8. Remove screws
- and bracket from the hard disk (Figure 3f).
9. Reverse the process to install a new hard disk (do not forget to replace all the screws and cover).
16
17
18
19
20
21
22
23
24

19. HDD Assembly
23. HDD Bracket
24. HDD
•2 Screws
Figure 3
HDD Assembly
Removal (cont’d.)
c. Remove the screws.
d. Slightly lift and pull the
HDD in the direction of
the arrow.
e. Lift the HDD assembly
out of the bay.
f. Remove the screws and
bracket from the HDD.
c.
f.
24
16
d.
18
e.
19
20
17
22
21
23