Clevo W330AU - Removing the SSD Module

Disassembly
2 - 16 Removing the SSD Module
2.Disassembly
Removing the SSD Module
SSD-1 module removal
1. Turn off the computer, remove the battery (page 2 - 5), keyboard (page 2 - 8), and bottom case (page 2 - 6).
2. The SSD module will be visible at point (Figure 7a
) on the mainboard.
3. Remove screw from the module socket (Figure 7b
).
4. The SSD assembly (Figure 7c) will pop-up.
5. Lift the SSD assembly (Figure 7d) up and off the computer.
6. Remove screw to separate the SSD module and bracket (Figure 7e).
Figure 11
SSD-1 Module
Removal
a. Locate the SSD assem-
bly.
b. Remove the screw.
c. The SSD assembly will
pop up.
d. Lift the SSD assembly
out.
e. Remove the screw to
separate the SSD mod-
ule and bracket.
1
2
3
3
4
5
6
3
a.
2
1
3
e.
b.
d.
c.
4
6 5

3. SSD Assembly
5. SSD Module
6. Bracket
•2 Screws