Clevo W330AU - Page 41

Disassembly
Removing the SSD Module 2 - 17
2.Disassembly
SSD-2 module removal
1. Turn off the computer, remove the battery (page 2 - 5), keyboard (page 2 - 8), and bottom case (page 2 - 6).
2. The SSD module will be visible at point (Figure 7a
) on the mainboard.
3. Remove screw from the module socket (Figure 7b
).
4. The SSD module (Figure 7c) will pop-up.
5. Lift the SSD module (Figure 7d) up and off the computer.
6. Reverse the process to install a new module (do not forget to place the thermal pad in the module, & copper shield-
ing in the bottom cover as shown in Figure 7e).
Figure 12
SSD-2 Module
Removal
a. Locate the SSD.
b. Remove the screw.
c. The SSD assembly will
pop up.
d. Lift the SSD assembly
out.
1
2
3
3
3
a.
2
1
3
e.
b.
d.
c.
5
6

3. SSD Module
5. Thermal pad
6. Copper Shielding
•1 Screw