Clevo W330AU - Removing the Msata Module

Disassembly
Removing the mSATA Module 2 - 15
2.Disassembly
Removing the mSATA Module
1. Turn off the computer, remove the battery (page 2 - 5), keyboard (page 2 - 8), and bottom case (page 2 - 6).
2. The mSATA module will be visible at point (Figure 7a
) on the mainboard.
3. Remove screw from the module socket (Figure 7b
).
4. The mSATA module (Figure 7c) will pop-up.
5. Lift the mSATA module (Figure 7d) up and off the computer.
Figure 10
mSATA Module
Removal
a. Locate the mSATA mod-
ule.
b. Remove the screw.
c. The mSATA module will
pop up.
d. Lift the mSATA module
out.
1
2
3
3
3
a.
2
1
3
d.
b.
c.

3. SSD Module.
•1 Screw