Clevo W330AU - Removing the Keyboard

Disassembly
2 - 8 Removing the Keyboard
2.Disassembly
Removing the Keyboard
1. Turn off the computer, remove the battery (page 2 - 5), and bottom case (page 2 - 6).
2. Remove screw
and carefully press the keyboard at point to elevate the keyboard from its normal position
(Figure 4a).
3. Carefully lift the keyboard
up, being careful not to bend the keyboard ribbon cable (Figure 4b).
4. Disconnect the keyboard ribbon cable from the locking collar socket
(Figure 4b)
5. Carefully lift up the keyboard
(Figure 4c) off the computer.
1
2
3
4
4
5
3
11
a.
b.
2
5
3
c.
4
Keyboard Tabs
5
d.
1
3

Re-Inserting the Key-
board
When re-inserting the
keyboard, align first
the four keyboard tabs
(Figure 4d) that are lo-
cated at the bottom, to
the slots in the case.
Figure 4
Keyboard Removal
a. Remove screw abd
press at point to re-
lease the keyboard.
b. Lift the keyboard up and
disconnect the cable
from the locking collar.
c. Remove the keyboard.
1

3. Keyboard
•1 Screw