Modules & Options
6 - 18 PC Camera Module
6
PC Camera Module
When the PC Camera application is run the LED indicator to the left of the camera
will be illuminated (see Figure 1 - 2 on page 1 - 7/Figure 1 - 3 on page 1 - 8).
Note that you need to use the Camera app in Windows to take pictures and capture
video. Use the Fn + F10 key combination (see “Function/Hot Key Indicators” on
page 1 - 12) to toggle power to the PC Camera module.
Note that you need to use the Camera app in Windows to take pictures and cap-
ture video.