Figure 1 - 12
Bottom View
Model B
1. Battery
2. Vent/Fan Intake/
Outlet
3. Speakers
Bottom Cover
Appearance
Note that some design
styles will have a bottom
cover that differs in ap-
pearance slightly form
that pictured here.
Overheating
To prevent your comput-
er from overheating
make sure nothing blocks
the Vent/Fan Intake while
the computer is in use.
3
Bottom Cover Removal Warning
Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may
violate the terms of your warranty.
If you need to replace/remove the hard disk/RAM/optical device etc., for any reason, please
contact your distributor/supplier for further information.
3
2
2
2
1
To Next Page
Loading...
