Clevo W950JU - Enabling & Activating TPM

Modules & Options
Trusted Platform Module 6 - 29
6
Enabling & Activating TPM
1. Restart the computer.
2. Enter the Aptio Setup Utility pressing F2 during the POST/startup.
3. Use the arrow keys to select the Security menu.
4. Select TPM Configuration and press Enter to access the sub-menu.
5. Select Enable in Security Device Support.
6. You will then need to press F4 to save the changes and restart the computer.
Figure 6 - 20
Security Device
Support (Enabled)