1 - 4 System Startup
Quick Start Guide
1
System Startup
1. Remove all packing materials, and place the computer on a stable surface.
2. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3. Attach the AC/DC adapter to the DC-In jack on the left of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter (make sure you use the adapter when first
setting up the computer, as to safeguard the computer during shipping the battery will be locked to not power
the system until first connected to the AC/DC adapter).
4. Use one hand to raise the
lid/LCD to a comfortable viewing angle (
do not exceed 130 degrees
);
use the other
hand to support the base of the computer (Note: Never lift the computer by the lid/LCD).
Figure 1 - 1 - Opening the Lid/LCD & Computer with AC/DC Adapter Plugged-In (One Model Pictured)
130°
Shutdown
Note that you should al-
ways shut your comput-
er down by choosing
the Shut Down com-
mand in Windows (see
page 1 - 32). This will
help prevent hard disk
or system problems.
To Next Page
Loading...
