Clickfree DVD Transformer for Macintosh: User Guide Advanced topics (DVD)
4. If you really want to remove the user‟s backup history from the Clickfree DVD
Transformer, click Yes.
Warning: Once you have removed a user‟s backup history from the Clickfree DVD
Transformer there is no way to recover that user‟s history.
To see how to remove the history for all users, see ”Master reset” on page 41.
MASTER RESET
To remove all back up history:
Master Reset is used to remove all back up history for all users that have been backed up
using your DVD Transformer, and to reset your selections of folders and categories to be
backed up and restored. For details, see “How do I change how Clickfree does backups?”
on page 52 and “How do I change how Clickfree restores content?” on page 63.
Note: Even after you perform a Master Reset you can still restore any previously
backed-up content from the backup disks. However, information about which files
are on which disk is lost.
If you want to remove only the backup history for one user, see “To remove a user” on
page 71.
1. On the Tools window click Master reset.
2. If you really want to remove all back up history from the Clickfree DVD Transformer,
click Continue.
Warning: Once you have reset Clickfree using the Master Reset there is no way to recover
any backup history.
UPDATING CLICKFREE SOFTWARE
From time to time Clickfree software is upgraded to provide new or enhanced features.
You can:
Have Clickfree check for updates each time you connect the Clickfree DVD
Transformer to your computer – this is the default action, you don‟t need to do
anything
Manually check for updates
In both cases your computer needs to be connected to the internet for updated software to
be found and installed.
To Next Page
Loading...
