ClimateMaster Tranquility TTV038 Series User Manual

Tranquility
®
30
(TT) Series
Models TTD/H/V 026 - 072
60 Hz - HFC-410A
INSTALLATION, OPERATION,
& MAINTENANCE
97B0075N05
Revised: 18 July, 2013
Table of Contents
Model Nomenclature 3
Unit Physical Data 6
Horizontal Installation 7
Field Conversion of Air Discharge 9
Horizontal Installation 10
Vertical Installation 11
Piping Installation 13
Water-Loop Heat Pump Applications 14
Ground-Loop Heat Pump Applications 15
Ground-Water Heat Pump Applications 17
Water Quality Standards 19
Electrical - Line Voltage 20
Electrical - Power Wiring 22
Electrical - Power & Low Voltage Wiring 23
Electrical - Low Voltage Wiring 24
Electrical - Thermostat Wiring 26
Blower Performance Data 27
ECM Blower Control 28
Typical Wiring Diagram - Units with CXM Board
and ECM Fan Motor (Single Phase) 30
Typical Wiring Diagram - Units with
ClimaDry
®
(Single Phase) 31
Typical Wiring Diagram - Units with CXM Board, 32
ECM Fan Motor, and MPC (DDC) CONTROLS
(SINGLE PHASE) 32
CXM Controls 33
DXM Controls 34
Safety Features - CXM and DXM Controls 36
ClimaDry
®
Modulating Reheat Option 38
Unit Starting and Operating Conditions 41
Piping System Cleaning and Flushing 42
Unit and System Checkout 44
Unit Start-Up Procedure 45
ClimaDry
®
II Option Corrections
(When Operating in Non-ClimaDry
®
Mode) 46
Unit Operating Conditions 47
Preventive Maintenance 49
Functional Troubleshooting 50
Performance Troubleshooting 51
Start-Up Log Sheet 52
Functional Troubleshooting 53
Warranty (U.S. & Canada) 54
Warranty (International) 55
Revision History 56

ClimateMaster Tranquility TTV038 Series Specifications

General

Brand	ClimateMaster
Model	Tranquility TTV038 Series
Category	Heat Pump
Language	English

Summary

Model Nomenclature

General Information

Safety

Critical safety warnings, cautions, and notices for installation and service.

Horizontal Installation

Vertical Installation

Piping Installation

Ground-Loop Heat Pump Applications

Electrical - Line Voltage

Electrical - Power Wiring

Connecting the incoming line voltage wires to the unit.

ECM Blower Control

CXM Controls

Field Configuration Options

Settings for the CXM controller, including jumpers and DIP switches.

DXM Controls

DIP Switches

Safety Features - CXM and DXM Controls

High pressure switch

Operation and function of the high pressure safety switch.

ClimaDry® Modulating Reheat Option

UNIT STARTING AND OPERATING CONDITIONS

Unit Start-up Procedure

Preventive Maintenance

Functional Troubleshooting

Main power problems

Troubleshooting issues related to main power supply.

Performance Troubleshooting

Insufficient capacity/ Not cooling or heating

Troubleshooting issues causing reduced cooling or heating capacity.