1. Introduction
1.1. General information
Thank you for choosing our MV8 control for Fan Coil !
1.2. Product features
The MV8 control for Fan Coil units has the following features:
The MV8 control connected to a digital panel MK2 or C-Touch permits to operate any Climma Fan coil with
a complete range of functions. The 8 speed control is made by means of capacitors with a perfect and totally
quiet control of the speeds from the minimum to the maximum speed. The MV8 control can manage also fan
coils with the water valve option and electrical heater.
The MV8 control accepts the supply of 230V either 50 or 60 Hz.
1.3. Directives
The Climma MV8 control respects the following directives.
• CE
• Low voltage: 2006/95/EC
• Electromagnetic Compatibility: 2004/108/EC
• Machinery Directive: 2006/42/CE
• Manufacturing quality Standards UNI EN ISO 9001:2008
1.4. Installation
The MV8 control must be installed following the instructions and specifications given in this manual.
1.5. Transport and handling
Take every precaution to prevent damage, when handling the unit or components keep in consideration the
information given on the packaging material.
1.6. Unpacking
The MV8 control is carefully packed in a strong carton box. Remove all the carton and the other packing
material. Check that the product has not been damaged.
Caution: Wear protective gloves when handling any packing materials and the wood base. Dispose of all
packaging materials appropriately in accordance with local codes.
WARNING!
Check that the technical specifications on the label are compatible with the Fan coil.
To Next Page
Loading...