EasyManua.ls Logo

Climma MV8 - Positioning of the MV8 Control; Fixing the MV8 Control

Default Icon
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Veco SpA
Installation manual MV8 Page 7 / 17
2.2. Positioning of the MV8 control
When choosing the position consider that the original cable supplied with the Climma Fan coil is di 3m long.
The control box MV8 has an IP20 grade protection, therefore it must be protected from splashing and
possible water dropping.
The control box can be installed horizontally or vertically.
2.3. Fixing the MV8 control
The fixing must be carried out using the special brackets supplied with the box and which allow the box to be
fixed without removing the electronic board. The brackets are fixed to the back of the box using the screws
provided. There are 6 fixing positions. The brackets extend 27 mm from the box profile.