1.7. General safety
Injuries or accidents caused by failure to comply with the recommendations of this manual are solely
the responsibility of the unit operator.
Basic Rules for Safe Operation:
• do not touch the unit with moist or wet hands or feet;
• never operate the unit while barefoot;
• before installation and maintenance operations, disconnect the unit from the power supply. failure to
comply may result in injury or death;
• installation and maintenance of this system can be hazardous due to system working pressure and
electrical components. Only a Climma certified service centre should install and maintain the system;
• to minimize the hazard of electrical shock and personal injury, this component must be effectively
grounded;
• during installation and maintenance follow safety codes, wear safety glasses and work gloves.
To Next Page
Loading...