2. INSTALLATION
The MV8 control must be installed in the nearby of the Fan coil which is equipped by a 3 m long cable.
2.1. Climma MV8 control technical features
The speed control of the Fan coil fan is obtained with 3+1 relays which connect individually or in
combination, the capacitors to the fan motor. There is also a relay to control the water valve and another
relay to power the electrical resistor.
The digital control panel is connected to the MV8 control by means of a cable RJ45 while the optional
ambient probe is connected to the control by a cable RJ12. The MV8 has another RJ12 to be used when
multiple boards are connected in parallel using the same digital panel.
The MV8 control has also a socket for the Modbus communication.
To Next Page
Loading...