Why are the Timer LED and Run LED flashing together, or showing "FE" on my CLIVET CN-XMi D80 Heat Pump?
If the Timer LED and Run LED flash together, or display "FE" on your CLIVET Heat Pump, it means there is no address when first time power on.
What does it mean if the Timer LED flashes or shows "E1" on my CLIVET CN-XMi D80?
If the Timer LED flashes or shows "E1" on your CLIVET Heat Pump, it indicates a communication error between the indoor and outdoor unit.
What does it mean when the Run LED flashes or shows "E2" on my CLIVET CN-XMi D80 Heat Pump?
If the Run LED flashes or shows "E2" on your CLIVET Heat Pump, it means there is a temperature sensor (T1) error.
What does it mean if the Run LED flashes or shows "E3" on my CLIVET CN-XMi D80 Heat Pump?
If the Run LED flashes or shows "E3" on your CLIVET Heat Pump, it indicates a temperature sensor (T2) error.
What does it mean if the Run LED flashes or shows "E4" on my CLIVET Heat Pump?
If the Run LED flashes or shows "E4" on your CLIVET Heat Pump, this indicates a temperature sensor (T2B) error.
What does it mean if the Defrost LED flashes or shows "E0" on my CLIVET CN-XMi D80?
If the Defrost LED flashes or shows "E0" on your CLIVET Heat Pump, it indicates a mode conflict.
What does it mean if the Alarm LED flashes slowly or shows "Ed" on my CLIVET CN-XMi D80?
If the Alarm LED flashes slowly or shows "Ed" on your CLIVET Heat Pump, it indicates an outdoor unit error.
What does it mean if the Timer LED flashes slowly or shows "E6" on my CLIVET CN-XMi D80 Heat Pump?
If the Timer LED flashes slowly or shows "E6" on your CLIVET Heat Pump, this indicates a DC FAN error.
What does it mean if the Defrost LED flashes slowly or shows "E7" on my CLIVET Heat Pump?
If the Defrost LED flashes slowly or shows "E7" on your CLIVET Heat Pump, it indicates an EEPROM error.
To Next Page
General
