Need help?Do you have a question about the CLIVET RG66B3 and is the answer not in the manual?
General| Model | RG66B3 |
|---|---|
| Category | Remote Control |
| Display | LCD |
| Material | Plastic |
| Color | White |
| Functions | Temperature control, mode selection, fan speed, timer |
| Compatibility | CLIVET air conditioning systems |
| Power Supply | 2 x 1.5V AAA batteries |
Controls the unit's power status.
Cycles through different operating modes like Auto, Cool, Dry, Heat, Fan.
Activates energy-saving or sleep mode for optimized comfort and efficiency.
Sets the unit to turn on or off at a specified time.
Toggles the indoor unit's LED display on or off.
Enables temperature sensing and room temperature display.
Activates rapid cooling or heating to reach desired temperature quickly.
Detects people's activities in the room to adjust operation.
Adjusts the fan speed settings.
Increases the set temperature.
Decreases the set temperature.
Controls the movement of the horizontal louvers.
Controls the movement of the vertical louvers.
Initiates the self-cleaning cycle for the indoor unit.
Instructions for powering the remote control using AAA batteries.
Steps for mounting the remote control holder on a wall.
Recommendations for battery usage and environmentally sound disposal.
Guidelines for optimal remote control operation and range.
Displays for unit status, modes (Auto, Cool, Dry, Heat, Fan), timers, temperature, and battery.
Icons representing Swing, Wind flow, Turbo, Lock, ECO, Silence, Fresh, Follow me, and Sleep modes.
How the unit automatically selects modes based on temperature.
How to operate the air conditioner in cooling mode.
How to use the unit for dehumidification.
How to operate the unit using only the fan.
How to operate the air conditioner in heating mode.
How to adjust the direction of the airflow using swing buttons.
Step-by-step guide to set the automatic turn-on timer.
Step-by-step guide to set the automatic turn-off timer.
Activates energy-efficient mode, typically setting temp to 24°C.
Optimizes energy use and comfort during sleep.
Measures ambient temperature at the remote's location.
Reduces operational noise by limiting compressor frequency.
Maintains a minimum room temperature of 8°C.
Accelerates cooling/heating or activates air purification.
Automatically cleans the indoor unit to remove moisture and bacteria.
Adjusts airflow based on detected human presence and movement.
Locks or unlocks the remote control buttons to prevent accidental changes.
To Next Page