CLIVET RG66B3 - Basic Functions: HEAT and Air Flow; HEAT Operation; Set Air Flow Angle

8
HEAT operation
How To Use The Basic Functions
NOTE: As outdoor temperature drops, the
performance of your unit s HEAT function
may be affected. In such instances, we
recommend using this air conditioner in
conjunction with other heating appliance.
1. Press the MODE button to select
HEAT mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FA N button to select the
fan speed in a range of Au%-F%, in
conjunction with Temp or Temp
button.
4. Press the ON/OFF button to start the
unit.
Set the angle of air flow
When the unit is on, press the swing button,
to activate the louver. Each time you press the
O
button, it will adjust the louver by 6 . Press the
button until the direction you prefer is reached.
If press and hold this button for more than 2
seconds, the louver will swing left and right
continuously.
When the unit is on, press the swing button,
to activate the louver. Each time you press the
O
button, it will adjust the louver by 6 . Press the
button until the direction you prefer is reached.
If press and hold this button for more than 2
seconds, the louver will swing up and down
continuously.