CLIVET WSAT-SC 120D Series User Manual

M01W45H6-06
WSAT-SC
75C-180F
Installation and Use Manual
WSAT-SC
75C
75C75C
75C-
--
-90C
90C90C
90C-
--
-65D
65D65D
65D-
--
-70D
70D70D
70D-
--
-75D
75D75D
75D-
--
-
80D
80D80D
80D-
--
-90D
90D90D
90D-
--
-100D
100D100D
100D-
--
-110D
110D110D
110D-
--
-120D
120D120D
120D-
--
-
135F
135F135F
135F-
--
-150F
150F150F
150F-
--
-165F
165F165F
165F-
--
-180F
180F180F
180F
AIR-COOLED WATER CHILLERS RATED FROM 190 TO 450 KW
Библиотека СОК 

CLIVET WSAT-SC 120D Series Specifications

General

Brand	CLIVET
Model	WSAT-SC 120D Series
Category	Chiller
Language	English

Summary

Installation and Use Manual

General Information and Unit Characteristics

General Warnings and Intended Use

Covers essential safety instructions, intended purpose, expert personnel requirements, and modifications.

Residual Risks and Safety Precautions

General Safety Risks and Danger Areas

Identifies general hazards, danger zones, and risks associated with handling and installation.

Specific Hazard Categories

Details risks related to moving parts, refrigerants, and water systems.

Electrical Data and Specifications

General Electrical Specifications

Component Technical Data

Unit Reception and Handling

Inspection and Storage Procedures

Safe Handling and Lifting Instructions

Detailed procedures for safely moving, lifting, and unpacking the unit.

Unit Positioning and Installation

General Positioning Guidelines and Clearances

Anti-vibration Mounts and Dimension Details

Water Connections and System Integration

Water Piping and Safety Guidelines

Electrical Connections and System Control

Wiring Diagrams and Power Supply Information

Remote Control and Monitoring Features

Unit Start-Up Procedures

Pre-Start System Checks

Essential checks for electrical, refrigerant, water, and aerulic systems before initial operation.

Operational Checks During Start-Up

Monitoring key parameters like voltage, absorption, and refrigerant circuit conditions during initial run.

Unit Control and Operation

Control Interface and Basic Operation

Thermoregulation and Set-Point Management

Logic for temperature control, set-point adjustments, and compensations.

Parameter Settings and Alarm Management

Routine Maintenance Procedures

Preventive Maintenance and Services

Maintenance Inspections

Refrigerant Circuit Testing and Data

Troubleshooting Guide

Common Fault Diagnosis

Identifying and resolving issues related to probes, transducers, high/low pressure conditions.

Protection System Troubleshooting

Diagnosing problems with compressor, fan, and pump protection circuits.