EasyManua.ls Logo

CLIVET WSAT-XEE 802 - 7 - CONTROL (CONTINUED); CIRCUIT 1 STATA - TAB 2

CLIVET WSAT-XEE 802
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
7 - CONTROL
CIRCUIT 1 STATA - TAB 2
code description description
DO-985 Cmd YVDW_DO2 Decreasing power valve (CR2_Bitzer) (15_RefComp) (screw compressor only): 0=Off 1=On
S1100 CMP1 starts Compressor 1 starts
S1101 CMP2 starts Compressor 2 starts
S1102 CMP3 starts Compressor 3 starts
S1103 StartsScrew Screw compressor starts
S1104 Source starts Source starts
S1105 Hours Comp.1 Hours Compressor 1
S1106 Hours Comp.2 Hours Compressor 2
S1107 Hours Comp.3 Hours Compressor 3
S1108 HoursScrew Hours screw compressor
S1109 HoursSource Hours Source
S1110 Total steps Total steps engaged on the circuit
S1111 Comp.1 status Compressor 1: 0=free 1=on 2=timing 3=Disabled
S1112 Comp.2 status Compressor 2: 0=free 1=on 2=timing 3=Disabled
S1113 Comp.3 status Compressor 3: 0=free 1=on 2=timing 3=Disabled
S1114 Current cap. Current capacity engaged on the circuit
S1115 Requested cap. Requested capacity on the circuit
S1116 Pressure ratio Pressure ratio (1+Hp/1+LP)
S1117 FANPreAlarm Max. fan pre-alarm 0=Off 1=On
S1118 Defrost delay Actual value defrost counting (0= defrost starting)
S1119 Defrost status Defrost status : 0=Defrost Off, 1=Defrost ON
S1120 HWErr Hardware fault POL94U module : handling possible
S1121 BlckingHWErr Hardware fault POL94U module handling impossible
S1122 FailSafeSta Safe status : 0=Off 1=On
S1123 UPSNotAval UPS faulty : 0=Off 1=On
S1124 CircWarning Circuit warning
S1125 CircBlock Circuit alarm
S1126 ThTDischarge Estimated discharge temperature

Table of Contents

Related product manuals