Why does the torque converter on my Club Car Utility Vehicle not shift smoothly?
If the torque converter in your Club Car Utility Vehicle isn't shifting smoothly, it could be due to a worn, cracked, glazed, or frayed drive belt. Other potential causes include a drive or driven clutch malfunction, or a sticking governor.
Why doesn't the transmission on my Club Car Utility Vehicle engage or disengage smoothly?
If the transmission in your Club Car Utility Vehicle doesn't engage or disengage smoothly, it could be due to several reasons. The transmission shifter linkage might be binding or out of adjustment, or the idle RPM setting could be too high. Other potential causes include an insufficient (low) level of lubricant or the wrong type of lubricant in the transmission, damaged or worn internal gears, or worn, damaged, or jammed synchronizer rings.
What causes the carburetor to flood on my Club Car Utility Vehicle?
If the carburetor in your Club Car Utility Vehicle is flooding, it could be due to a leaking, dirty, worn, or damaged inlet valve or seat. Another possibility is a damaged float filled with gasoline, or a float needle valve that isn't functioning properly. A clogged carburetor vent could also be the cause.
General| Fuel Type | Gasoline |
|---|---|
| Transmission | Automatic |
| Ground Clearance | 4.5 in (11.4 cm) |
| Cargo Bed Capacity | 300 lbs |
| Overall Width | 48 inches |
To Next Page
