Before starting installation please consider the following items:
This unit is designed for outdoor usage（IP65）. Do not expose the PV-Inverter to direct
sunlight. Direct sunlight increases the internal temperature that may reduce conversion
efficiency.
Check the ambient temperature of installation is within specified range -20 ~ +55℃
The AC grid voltage is between 190 and 260VAC, 50Hz.
Qualified personnel are performing the installation.
Adequate convection space surrounds the inverter.
Inverter is being installed away from explosive vapors.
No flammable items are near the inverter.
it is recommended that Inverter is installed where the ambient temperature is between
0~45℃
2. Installation
1) Safety instructions
A. Do not remove the casing. Inverter contains no user serviceable parts. Refer
servicing to qualified service personnel.
B. Both AC and DC voltage sources are terminated inside the PV Inverter. Please
disconnect these circuits before servicing.
C. When a photovoltaic panel is exposed to light, it generates a DC voltage. When
To Next Page
Loading...