CNC STB4100 - Installing the Motion Card Plug-In

Mach3 USB Motion Card STB4100 V2.1
1.3.2 Installing the motion card plug-in.
Unzip the usb move.zip, copy or drag RnRMotion.dll into your Mach3\PlugIns folder.
1.3.3 Start the Mach3 software, a dialogue of “Motion Control Hardware PlugIn sensed!” is
shown. Please select the“ RnRMotionControllerECO-V2.0”, you can also check”Don't ask me
this again”.