Need help?Do you have a question about the CNET CSH-2402G and is the answer not in the manual?
General| MAC Address Table Size | 8K entries |
|---|---|
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| Weight | 2.5 kg |
| Features | Auto-negotiation, Auto MDI/MDI-X, Flow control, Quality of Service (QoS) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Jumbo Frame Support | 9K |
| Power Supply | Internal |
| Dimensions | 44 cm x 4.4 cm |
Lists the main capabilities and technologies supported by the switch.
Describes the components and ports located on the front of the switch unit.
Details the components and connectors found on the rear panel of the switch.
Instructions for placing the switch on a flat surface for operation.
Guidance on how to mount the switch securely into a standard equipment rack.
Steps to enable and configure advanced management features via a console connection.
Overview of the primary navigation structure for configuring the switch.
Configures system-wide parameters like packet length and aging time.
Allows enabling or disabling individual network ports on the switch.
Sets operational modes like speed and duplex for each network port.
Manages virtual LAN configurations by grouping switch ports.
Configures the flow control mechanism to manage network traffic congestion.
Adjusts priority settings for different types of network traffic.
Options for restarting the switch or restoring factory default settings.
Describes methods to reset the device, including software and hardware power cycling.
Key considerations for planning network layout and switch integration before installation.
Explains the differences between Fast Ethernet and Gigabit Ethernet speeds and cabling requirements.
Information about the switch's MAC address learning and storage behavior.
To Next Page
