JET MAINTENANCE
CAUTION: Turn off the spa from main GFCI breaker
to carry out any maintenance procedures.
It is important to regularly clean the jets to prevent any
unwanted depositions and potential damage to the plumbing. It
is the responsibility of the customer to regularly perform the
maintenance procedures. To clean and maintain optimum jet
functions, follow the maintenance instructions below.
LAMINAR FLOW JET MAINTENANCE INSTRUCTIONS
1. Rotate counterclockwise and pull out the jet body
(Picture 1a and 1b).
2. Using clean piece of cloth, remove the dust particles or
debris (Picture 2).
3. Remove the unreachable debris with the help of vacuum
cleaner (Picture 3).
4. Assemble the jet insert back by rotating the jet body
clockwise (Picture 4a and 4b).
To Next Page
Loading...
