Coats 7050 - Table of Contents

Table of Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . .iii
Owner’s Responsibility . . . . . . . . . . . . . . . . . . . . . .iii
Operator Protective Equipment . . . . . . . . . . . . . . . .iii
Definitions of Hazard Levels . . . . . . . . . . . . . . . . . .iii
Safety Notices and Decals . . . . . . . . . . . . . . . . . . .iv
Remember R.I.M. . . . . . . . . . . . . . . . . . . . . . . . . . .iv
Principle Operating Parts . . . . . . . . . . . . . .2 - 3
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Operating Instructions . . . . . . . . . . . . . . . .4 - 9
Bead Loosening and Demounting . . . . . . . . . . .4 - 7
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 - 9
Inflation . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 13
Bead Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Bead Seating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Inflation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Stages of Inflation on a Conventional
Tire and Rim . . . . . . . . . . . . . . . . . . . . . . . . . .14
Mismatched Tires and Wheels . . . . . . . . . . .15
Performance, Custom, and Aluminum
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . .16 - 19
Performance Tires and Wheels • Demounting . . .16
Aluminum and Custom Wheels . . . . . . . . . . .17 - 18
Performance Tires and Wheels • Mounting . . . . . .19
Custom and Special Wheels . . . . . . . . . . . . .20
Alloy Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
European Performance Wheels
(Asymmetrical Hump) . . . . . . . . . . . . . . . . . . . . . .20
Wheels with Low Pressure
Warning Sensors . . . . . . . . . . . . . . . . . . . . . . . . . .20
Tube Type Tires . . . . . . . . . . . . . . . . . . . . . . . .20
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Demounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Maintenance Instructions . . . . . . . . . . .21 - 24
Duckhead (Mount/Demount Head) Cleaning . . . . .21
Duckhead (Mount/Demount Head) Adjustment . .22
Robotic Arm Maintenance . . . . . . . . . . . . . . . . . . .22
Separator/Lubricator Maintenance
(If equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Pressure Limiter Maintenance . . . . . . . . . . . . . . .23
Oil Injector Maintenance (If equipped) . . . . . . . . .24
Installation Instructions . . . . . . . . . . . . . . . . .25
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Air Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Electrical Source . . . . . . . . . . . . . . . . . . . . . . . . . .25
Critical Safety Instructions . . . . . . .Back Cover
NOTICE
Read entire manual before assembling,
installing, operating, or servicing this
equipment.
Important: Always read and follow the operating instructions. • 1