Coban TK06B - Geo-fence and Movement Alerts; Geo-fence Alarm Setup

11
“power alarm+latitude/longtitude” to central number when external power is cut
off.
5.12.2 This function disactivates as default. Cancel: Send SMS “extpower+
password+space+0” to deactivate it.
5.13 Geo-fence alarm
Set up a geo-fence for the tracker device to restrict its movements within a
district. The unit will send SMS to the central number when it detects alarm.
Remark: 0 represents close alarm; 10 represents out fence alarm; 01
represents enter fence alarm; 11 represents out and enter fence alarm.
5.13.1 Set Up:
Send SMS“stockade+password+space+semi-diameter+space+alarm type” to
unit to set the restricted district. In case of breach, it will send SMS
“stockade!+geo-info” to the central number.
For example: send SMS “stockade000000 500 1” stands for based on device
current coordinates as center, 500 is semi-diameter, set 1 as out fence alarm
type.
5.13.2 Cancel: Send SMS “nostockade+password” to deactivate this function.
5.14 Movement alarm
Device will send movement alarm once vehicle moved 100 meters. The
function is default activate if detected vehicle ACC ON. When vehicle ACC
OFF stands for closing movement alarm.
(Note: this function must connect ACC wire ).