COBHAM AVIATOR UAV 200 - AVIATOR UAV 200 Specifications; Technical Specification Details

AVIATOR UAV 200
Installation Manual
Document: 677-A0219_IM issue 1.4
COBHAM PUBLIC
Page 24 of 61
7. EQUIPMENT SPECIFICATIONS
7.1 AVIATOR UAV 200 SPECIFICATIONS
The AVIATOR UAV 200 overview of the technical specification are shown below.
Table 7-1: Equipment Specifications for AVIATOR UAV 200
Specification
Details
Power Requirements
12 to 32 VDC @ 28W
Dimensions (nominal)
L = 241 mm
W = 157 mm
H = 63 mm
Weight
1.45 kg
Temperature Range
-40 °C to + 55 °C
Max Altitude
6000 m (~20000ft) amsl
amsl = Above Mean Sea Level
Frequency
Rx: 1518 MHz – 1559 MHz
Tx: 1626.5 MHz – 1660.5 MHz and 1668.0 MHz – 1675. MHz
Compass Safe Distance
15 – 25cm (dependant on position)
GNSS Interference Distance
Dependent on the receiver antenna and LNA design. It is
recommended to be more than 45cm.