EasyManua.ls Logo

COBHAM AVIATOR UAV 200 - Returns Policy and Repackaging; Warranty, Non-Warranty, and Repackaging

COBHAM AVIATOR UAV 200
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document: 677-A0219_IM issue 1.4
COBHAM PUBLIC
Page 60 of 61
9.2.1.2 Non-Warranty Returns
Equipment that fails to work properly because of improper or negligent use, abuse, shipping damaged or
any other condition can still be returned to Cobham for repair or replacement at our discretion.
The customer will be notified of the cost to repair or replace the unit before invoicing for repair or
replacement. The customer is charged for the shipping cost to and from Cobham.
9.2.1.3 Repackaging Requirements
The AVIATOR UAV 200 should be returned to Cobham in the original packaging. If the original packaging is
not available, follow these guidelines when repacking the unit:
1. Protect the connector from physical damage and electrostatic discharge.
2. Wrap the unit in heavy paper or in bubble plastic sheets. Attach a tag with model number, serial
number and return address.
3. Use a strong shipping container, e.g. double-walled carton or similar.
4. Protect the upper radome/dust cover surface with suitable material (cardboard, foam or bubble
plastic sheets) and insert approximately a 7 cm layer of shock absorbing material between all
surfaces of the equipment and the sides of the container.
5. Seal the shipping container securely.
6. Mark the shipping container FRAGILE to ensure careful handling. Failure to do so may invalidate the
warranty.