Chapter 4: Using the Terminal Control Unit
38 Configuration
Use DHCP : 1
IP address : 0.0.0.0
IP mask : 0.0.0.0
IP gateway : 0.0.0.0
IP DNS : 0.0.0.0
ISO address : 0
Unique number : 0x00211628
Dev. inst. : 0
Dev. class inst. : 0
Host : 0
To use a DHCP server
It is recommended to set Use DHCP to on (1). Type the following for
automatically assigning an IP address to the Terminal Control Unit:
tt6194:/$ sysconf h 1
To set a static IP address
If needed in your network you can set a static IP address for the Terminal
Control Unit.
Example: Set Terminal Control Unit to IP address: 169.254.2.2, IP netmask:
255.255.0.0:
tt6194:/$ sysconf h 0
tt6194:/$ sysconf i <169.254.2.2>
tt6194:/$ sysconf a <255.255.0.0>
To set a gateway type:
tt6194:/$ sysconf g <gateway ip address>
To set a DNS server type:
tt6194:/$ sysconf d <dns ip address>
To Next Page