Chapter 2: Operation
List of alarms 45
22222
Operation
NavStatus
incorrect
(ID 010)
The SAILOR 6282
AIS Transponder
continues
operation.
This alarm is activated if a
mismatch exists between
the sensor input and the
Voyage settings status. E.g.
when the status is set by
the operator to At Anchor
and the ship is moving
faster than 3 kn, this alarm
is activated.
Enter the AIS
Application on
the SAILOR 6004
Control Panel
and set Status in
Settings >
Voyage to the
correct state
according to the
ship’s current
movement.
Heading
sensor offset
(ID 011)
The SAILOR 6282
AIS Transponder
continues
operation.
This alarm is activated when
SOG is greater than 5 kn and
the difference between
COG and HDT is greater
than 45° for 5 min.
Check the
heading sensor
and its NMEA
connection to
the AIS
Transponder.
Active AIS-
SART
(ID 014)
The SAILOR 6282
AIS Transponder
continues
operation.
This alarm is activated when
the SAILOR 6282 AIS
Transponder receives a
position report from an AIS
search and rescue
transponder (SART). The
AIS SART indicates the
position of persons in
distress. It is displayed on
the first line in the AIS list
view on the SAILOR 6004
Control Panel.
Alarm Consequence Reason Remedy
Table 9: AIS Alarms (Continued)
To Next Page
Loading...
