Chapter 2: Operation
44 List of alarms
MKD
Connection
lost
(ID 008)
The SAILOR 6282
AIS Transponder
continues
operation with
DTE set to 1, the
MKD is not active.
This alarm is activated by
the system, if the AIS
Transponder does not
receive heartbeat messages
from at least one minimum
keyboard display (MKD)
unit (e.g. SAILOR 6004
Control Panel).
Check the power
supplies, cabling,
Ethernet
connection
between the AIS
Transponder and
the SAILOR 6004
Control Panel.
Restart both
units: SAILOR
6282 AIS
Transponder:
remove and
connect power,
SAILOR 6004
Control Panel:
use on/off
button.
Internal /
external GNSS
position
mismatch (ID
009)
The SAILOR 6282
AIS Transponder
continues
operation.
This alarm is activated when
the distance between the
external and internal GNSS
position remains >100 m
for an interval longer than
15 minutes.
Check the NMEA
connection
between external
GNSS receiver
and the AIS
Transponder.
Check as well the
GNSS antenna,
plugs, and cable
to the AIS
Transponder.
Alarm Consequence Reason Remedy
Table 9: AIS Alarms (Continued)
To Next Page
Loading...
