Cobra Bridge 4100 - Personal Pin Code

Fitting instructions - BRIDGE 4100
17
www.cobra-at.com
STICK ON PIN
CODE LABEL
PERSONAL PIN CODE
5CG4195A1A
S/N 0003 050524
PIN
CODE
1122
INFORMATION
The sistem has an auto - learning function that simplifies the radio control operations when
enable by the user. The procedure is described in the installation manual.
PERSONAL PIN CODE
Each 4000 system has a PIN code that is used to override the system in emergencies.
This is a PIN CODE CARD sample
(PIN CODE is factory - setted):
TOGLIERE LA PARTE CENTRALE CONTENENTE GLI SCHEMI ELETTRICI DI MONTAGGIO.
PULL OUT THE CENTER SECTION WITH THE INSTALLATION CIRCUIT DIAGRAMS.
RETIRE A PARTE CENTRAL QUE CONTEM OS ESQUEMAS ELECTRICOS DE MONTAGEM.
QUITAR LA PARTE CENTRAL QUE CONTIENE LOS ESQUEMAS ELÉCTRICOS DE MONTAJE.
GB
We advise you to stick the PIN CODE adhesive label
on to the PIN CODE card (which may be found on
the rear of the control unit).
06DE2143E.pmd 07/02/2008, 15.1517